S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Reminder Suffix: The scan tool displays the reminder warning identification number in the BCM.
Retained Accessory Power (RAP) Calibration Number: The scan tool displays the RAP calibration part number in the BCM.
Retained Accessory Power (RAP) Suffix: The scan tool displays the RAP identification number in the BCM.
Security Calibration Number: The scan tool displays the security calibration part number in the BCM.
Security Suffix: The scan tool displays the security identification number in the BCM.
Outputs
Chime: The scan tool displays the commanded state of the audible chime. The scan tool displays NONE when no audible chime is commanded. The
scan tool displays HEAD LAMP, KEY IN IGNITION, SEAT BELT, TURN SIGNAL and PARK BRAKE as commanded.
Courtesy Lamp Relay: The scan tool displays the commanded state of the courtesy lamp relay. The scan tool displays ON when the BCM allows the
courtesy lamp relay coil to go to ground to activate the courtesy lamps.
Daytime Running Lamps (DRL) Relay: The scan tool displays the commanded state of the DRL relay. The scan tool displays ON when the BCM
allows the DRL relay coil to go to ground to activate the daytime running lamps.
Dimming: The scan tool displays the state of the panel dimmer switch. The scan tool displays ACTIVE when the park lamps are ON.
Door Lock Relay: The scan tool displays the commanded state of the door lock relay. The scan tool displays ON when the keyless entry transmitter
LOCK button or the power lock switch is activated. The BCM allows the door lock relay coil to go to ground, locking the doors.
Driver Door Unlock Relay: The scan tool displays the commanded state of the driver door unlock relay. The scan tool displays ON when the keyless
entry transmitter UNLOCK button or the power unlock switch is activated. The BCM allows the driver door unlock relay coil to go to ground, unlocking
the doors.
Headlamp Power Relay: The scan tool displays the commanded state of the headlamp power relay. The scan tool displays ON when the BCM allows
the headlamp power relay to go to ground to activate the headlamps.
Horn Relay: The scan tool displays the commanded state of the horn relay. The scan tool displays ON when the BCM allows the horn relay to go to
ground to activate the horn(s). The BCM will command this state when the PANIC button on the keyless entry transmitter is activated and when there is
an unauthorized entry into the vehicle.
Inadvertent Power Relay: The scan tool displays the commanded state of the inadvertent power relay. The scan tool displays ON when the BCM
allows the inadvertent power relay to go to ground. The BCM allows the component of the courtesy circuit to remain on until the BCM times it off.
Interior Lighting Mode: The scan tool displays the name of the feature which commanded the interior lights on. The scan tool displays NONE when
the interior lights are not commanded on. The scan tool displays INTERIOR, ILLUM. ENTRY, EXIT LIGHTING and REMOTE ILLUM. when the
respective mode commands the interior lights on.
Lift Glass Relay: The scan tool displays the commanded state of the lift glass relay. The scan tool displays ON when the BCM allows the lift glass relay
to go to ground opening the lift glass for the vehicles with this feature.
Park Lamp Relay: The scan tool displays the commanded state of the park lamp relay. The scan tool displays ON when the BCM allows the park lamp
relay to go to ground to activate the park lamps.
Passenger Door Unlock Relay: The scan tool displays the commanded state of the passenger door unlock relay. The scan tool displays ON when the
BCM allows the passenger door unlock relay to go to ground to UNLOCK the passenger door(s). The BCM will command this state when the UNLOCK
button on the keyless entry transmitter is activated twice within 3 seconds.
Retained Accessory Power (RAP) Relay: The scan tool displays the commanded state of the RAP relay. The scan tool displays ON when the BCM
allows the RAP relay to go to ground. The BCM will allow operation of the radio and the power windows with the ignition OFF and the doors closed for
up to 1198 seconds (approximately 20 minutes).
Security Data
Auto Learn Timer: The scan tool displays the seconds used by the BCM to learn valid code from the Passlock(TM) sensor. The learn procedure
consists of 3 consecutive periods.
Battery Voltage: The scan tool displays the battery system voltage.
Content Theft Lamp: The scan tool displays the state of the SECURITY lamp. The scan tool displays ON when activated by an unauthorized entry.
Content Theft State: The scan tool displays the state of the content theft feature. The scan tool displays ON when activated by an unauthorized entry.
