S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Pulsed Secondary Air Injection Vacuum Solenoid: Service and Repair
AIR VACUUM CONTROL SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Raise vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove vacuum line from solenoid (5).
3. Disconnect electrical connector (6) from the solenoid.
4. Remove solenoid from bracket on pump.
INSTALLATION PROCEDURE
1. Install solenoid (5) to bracket on pump.
2. Connect electrical connector (6) to the solenoid.
3. Install vacuum line to solenoid.
4. Lower vehicle.
