S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
REMOVAL PROCEDURE
1. Disconnect the spark plug wire at each spark plug.
^
Twist the boots one-half turn before removing.
^
Pull only on the boot or use a tool designed for this purpose in order to remove the wire from each spark plug.
2. Disconnect the spark plug wire from the coil.
^
Twist each spark plug boot 1/2 turn.
^
Pull only on the boot or use a tool designed for this purpose in order to remove the wires from the coil.
INSTALLATION PROCEDURE