gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Deployment Procedures|Page 8474 > < Deployment Procedures
Page 2
background image

9. When deploying an IP module, refer to the following instructions:

^

Place the J 39401-B SIR deployment fixture (2) in the center of the cleared area.

^

Fill the deployment fixture (2) with water or sand.

^

Mount the IP module (1) in the deployment fixture (2) with the vinyl/plastic trim facing up.

^

To mount, use 4 6 bolts (6), nuts (8), and washers (7) to properly secure the IP module (1) to the deployment fixture (2).

^

Tighten all fasteners prior to deployment.

10. Inspect the J 38826 SIR deployment harness and the appropriate pigtail adapter for damage. Replace as needed.
11. Short the 2 SIR deployment harness (1) leads together using 1 banana plug seated into the other.
12. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).

Deployment Procedures|Page 8474 > < Deployment Procedures