gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Deployment Procedures|Page 8486 > < Deployment Procedures|Page 8484
Page 14
background image

44. Place a power source, 12 V minimum/2 A minimum (i.e., a vehicle battery) near the shorted ends of the passenger side deployment harness.
45. Separate the 2 ends of the IP module deployment harness wires.
46. Connect the IP module deployment harness wires to the power source in order to deploy the IP module.
47. Disconnect the IP module deployment harness wires from the power source.

48. Twist together 1 end of each wire of the IP module on the passenger side deployment harness in order to short the wires.

Deployment Procedures|Page 8486 > < Deployment Procedures|Page 8484