S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. Install the seat belt retractor assembly to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt that retains the seat belt retractor assembly to the vehicle.
Tighten
Tighten the seat belt retractor assembly bolt to 70 N.m (52 lb ft).
3. Guide the seat belt through the opening in the body side trim cover.
4. Install the body side trim panel.
5. Install the seat belt opening trim cover by firmly pressing the cover into place.
