gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine - Low Power, Stall, and No Start|Page 657 > < Instruments - Inaccurate/Erratic Fuel Gauge Readings
Page 1
background image

Fuel Gauge Sender: All Technical Service Bulletins
Engine - Low Power, Stall, and No Start

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 01-06-04-038

Date: July, 2001

TECHNICAL

Subject:

Engine Low Power, Stall, No Start
(Replace Modular Fuel Sender Assembly and Fuel Filter)

Models:
2000-2001 Chevrolet and GMC S Pickup Models 
With 2.2 L Engine (VIN 5 - RPO L43)

Condition

Some customers may comment on the engine exhibiting a low power, stalling, and/or a no start condition.

Cause

A restricted or plugged modular fuel sender/pump assembly fuel strainer may result in reduced fuel flow.

Correction

Replace the existing modular fuel sender assembly with a new assembly, P/N 15073337 and the existing fuel filter with a new filter, P/N 15077584. The
new modular fuel sender assembly is equipped with a larger mesh strainer and the new fuel filter is designed to filter not only the fuel directed to the
engine, but also the fuel being returned to the fuel tank. When replacing the modular fuel sender assembly, a new sender to tank seal, P/N 15073338, will
also be required.

When replacing the required components, follow the applicable service procedure in the 2001 Service Manual.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

Engine - Low Power, Stall, and No Start|Page 657 > < Instruments - Inaccurate/Erratic Fuel Gauge Readings