S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
8. Remove automatic level control sensor from the bracket.
Installation Procedure
Notice: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the
sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic
level control system or the vehicle.
1. Install the automatic level control sensor to the automatic level control sensor bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the automatic level control sensor to the automatic level control sensor bracket bolts.
Tighten
Tighten the automatic level control sensor to the automatic level control sensor bracket bolts to 4 Nm (35 inch lbs.).
3. Install the automatic level control sensor link to the automatic level control sensor arm ball stud.
4. Install the automatic level control sensor bracket assembly to the vehicle.
5. Install the automatic level control sensor bracket assembly to the rear shock and spare tire crossmembers bolts.
Tighten
Tighten the automatic level control sensor bracket to the rear shock and spare tire crossmember bolts to 12 Nm (110 inch lbs.).
6. Install the automatic level control sensor link to the rear differential bracket ball stud.
