S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
5. Disconnect the relay rod ball stud from the pitman arm using J 24319-B.
6. Remove the relay rod ball stud nut at the idler arm.
7. Disconnect the relay rod from the idler arm using J 24319-B.
8. Remove the relay rod.
9. Inspect the following components:
-
The threads on the tie rod for damage
-
The threads on the tie rod end for damage
-
The ball stud threads for damage
-
The ball stud seals for excessive wear
10. Clean the threads on the ball stud and ball stud nut.
Installation Procedure
