S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Front Steering Knuckle: Service and Repair
-
Tools Required
-
J 23742 Ball Joint Separator
-
J 24319-B Universal Steering Linkage Puller
-
J 29193 Steering Linkage Installer
Removal Procedure
Caution: Refer to Caution: Floor Jack in Service Precautions.
1. Raise the vehicle. Refer to Vehicle Lifting.
-
Support the lower control arm with floor stands.
-
Place floor stands under the lower control arms as far outboard as possible (between spring seats and ball joint) to maintain maximum
leverage.
2. Remove the rotor. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD Pickup) or Wheel Hub, Bearing, and Seal Replacement (4WD
Pickup and Utilities).
3. Remove the bolts that attach the splash shield to the steering knuckle.
