S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. Install the power steering cooler hose to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the power steering cooler hose to the power steering cooler.
Tighten
Tighten the power steering cooler hose to the power steering cooler clamp to 2 Nm (18 inch lbs.).
3. Connect the power steering cooler hose to the power steering pump.
Tighten
Tighten the power steering cooler hose to the power steering pump clamp to 2 Nm (18 inch lbs.).
4. Remove the drain pan from under the vehicle.
5. Install the air cleaner assembly.
6. Bleed the power steering system. Refer to Bleeding the Power Steering System.
