S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
7. Remove the steering shock absorber from the relay rod using J 24319-B.
8. Remove the steering shock absorber mounting bolt at the front crossmember bracket nut.
9. Remove the steering shock absorber mounting bolt from the front crossmember bracket.
10. Remove the steering shock absorber.
11. Inspect the ball stud threads for damage.
12. Inspect the ball stud seals for excessive wear.
13. Clean the threads in the ball stud and the ball stud nut.
Installation Procedure
1. Install the steering shock absorber mounting bolt to the front crossmember bracket.
Notice: Refer to Fastener Notice in Service Precautions.
