S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Control Arm Bushing: Service and Repair
Upper Control Arm Bushings Replacement
-
Tools Required
-
J 21474-01 Control Arm Bushing Service Set
-
J 22269-1 Tie Rod End Installer
Removal Procedure
1. Remove the upper control arm from the vehicle.
Refer to Upper Control Arm Replacement.
2. Install the upper control arm in a vise.
3. Remove the washers and the nuts from upper control arm shaft.
4. Remove the upper control arm bushings.
Use the J 22269-1 and J 21474-5.
5. Remove the upper control arm shaft from the upper control arm.
Installation Procedure
