S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
3. Position the rear tie rod in the axle bracket.
Notice: Refer to Fastener Notice in Service Precautions.
4. Loosely install the following parts to the frame bracket:
-
The bolt
-
The washers
-
The nut
Tighten
-
Tighten the rear tie rod to axle bracket nut to 61 Nm (45 ft. lbs.).
-
Tighten the tie rod to the frame bracket nut to 61 Nm (45 ft. lbs.).
5. Remove the rear axle support.
6. Lower the vehicle.
