S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Ride Height Sensor: Service and Repair
Automatic Level Control Sensor and Bracket Replacement
Automatic Level Control Sensor and Bracket Replacement
Removal Procedure
Notice: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the
sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic
level control system or the vehicle.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the automatic level control sensor electrical connector.
3. Remove the automatic level control sensor link from the rear differential bracket ball stud.
4. Remove the automatic level control sensor bracket assembly to the rear shock and spare tire crossmember retaining bolts.
5. Remove the automatic level control sensor bracket assembly from the vehicle.
6. Remove automatic level control sensor link from the automatic level control sensor arm ball stud.
7. Remove automatic level control sensor to the bracket bolts.