S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Compressor/Pump: Service and Repair
Automatic Level Control Air Compressor Head Replacement
Automatic Level Control Air Compressor Head Replacement
Removal Procedure
1. Remove the automatic level control air dryer from the automatic level control air compressor. Refer to Automatic Level Control Air Dryer
Replacement.
2. Remove the wiring terminals B and C (1) from the automatic level control air compressor electrical connector.
3. Remove the automatic level control air compressor head retaining bolts.
4. Remove the automatic level control air compressor head (2) from the automatic level control air compressor.
5. Remove the O-ring (3) from the automatic level control air compressor.
6. Remove the automatic level control air compressor head wires from the conduit and the tie straps.
Installation Procedure
1. Route the automatic level control air compressor head wires through the tie strap and the conduit.
2. Install the O-ring (3) to the automatic level control air compressor.
3. Install the automatic level control air compressor head (2) to the automatic level control air compressor.
Notice: Refer to Fastener Notice in Service Precautions.
