S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
4. Raise the axle support so that there is a distance of 164 - 176 mm (6.46 - 6.94 inch) between the axle tube and the metal surface of the bumper
bracket (1).
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the spring shackle mounting nuts.
Tighten
Tighten the spring shackle mounting nuts to 122 Nm (89 ft. lbs.).
6. Remove rear axle support.
7. Raise exhaust system and connect rear exhaust hangers, if necessary.
8. Install the spare tire, if necessary.
9. Install the EVAP canister (2-door utilities only), if necessary.
10. Install the fuel tank (2-door utilities only).
11. Lower the vehicle.