S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
11. Remove the torsion bars. Note the exact direction of the forward end and the side of the torsion bar that is being removed.
12. Remove the torsion bar links lower retaining nuts.
13. Remove the torsion bar links from the torsion bar support.
Installation Procedure
1. Install the torsion bar links to the torsion bar support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the torsion bar links lower retaining nuts.
Tighten
Tighten the torsion bar links lower retaining nuts to 50 Nm (37 ft. lbs.).
