S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Disconnect the automatic transmission shift lock control actuator electrical connector.
4. Put the shift lever clevis into the neutral position.
5. Use a small screwdriver to pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam
assembly.
6. Remove the automatic transmission shift lock control actuator.
Installation Procedure
1. Firmly install the automatic transmission shift lock control actuator onto the steering column jacket and the cable shift cam assembly.
2. Connect the automatic transmission shift lock control actuator electrical connector.
3. Adjust the automatic transmission shift lock control actuator (with the shift lever clevis in the neutral position) in the following way:
3.1. Pull out the tab (1) on the adjuster block side (2) of the automatic transmission shift lock control actuator.
3.2. Press on the adjuster block (2) to compress the internal adjuster spring, which disengages the adjuster teeth. Slide the adjuster block (2) as far
away from the actuator as possible.