gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Shift Linkage, A/T > < Floor Shift Control Boot Replacement|Page 5730
Page 2
background image

Notice:  Refer to Fastener Notice in Service Precautions.

2. Install the nuts securing the shift controller to the floor panel.

Tighten the nuts to 25 Nm (18 inch lbs.). 

3. Install the shift cable. 

4. Install the shift control cover.
5. Install the shift boot. 

Shift Linkage, A/T > < Floor Shift Control Boot Replacement|Page 5730