S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Pilot Bearing: Service and Repair
Pilot Bearing Replacement
^
Tools Required
-
J 43276 Clutch Pilot Bearing Remover
Removal Procedure
1. Remove the engine flywheel.
Caution: Refer to Safety Glasses Caution in Service Precautions.
Notice: When using the J 43276 Clutch Pilot Bearing Remover always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench.
Do not allow the J 43276-1 tool body to rotate. Failing to do so will cause damage to the J 43276-1 tool body.
2. Remove the clutch pilot bearing using the J 43276.
2.1. Install the J 43276-1 tool body into the clutch pilot bearing.
2.2. Using a wrench secure the J 43276-1 tool body.
2.3. Insert the J 43276-2 forcing screw into the J 43276-1 tool body.
2.4. Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the
crankshaft.
2.5. Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.
2.6. Remove the J 43276-1 tool body from the clutch pilot bearing.
3. Discard the clutch pilot bearing.
Installation Procedure
Caution: Refer to Safety Glasses Caution in Service Precautions.
1. Install the NEW clutch pilot bearing using a suitable clutch pilot bearing installation tool.
2. Measure to ensure the proper installation depth is obtained.
3. Install the engine flywheel.
