S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
8.
Draw an alignment mark between the pinion stem and the pinion flange/yoke.
9.
Install the J 8614-01 as shown.
10.
Remove the pinion nut while holding the J 8614-01.
11.
Remove the washer.
12.
Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01(1) as shown.
13.
Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J 8614-01(1).
Use a container in order to retrieve the lubricant.
Important:
Do not damage the axle housing sealing surface.
14.
Remove the pinion oil seal using a suitable seal removal tool.
Installation Procedure
