S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Fluid - M/T: Service and Repair
NV 1500
Fluid Replacement
^
Tools Required
-
J36511 Oil Fill/Drain Plug Hex Bit (17 mm)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Thoroughly clean around the fill plug and the oil drain plug.
3. Use the J 36511 in order to remove the oil fill plug.
4. Catch the oil in a suitable container.
5. Use the J 36511 in order to remove the oil drain plug.
Installation Procedure
1. Apply sealant to the oil drain plug threads. Use Teflon 0D GM P/N 1052080, or the equivalent.
