gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Extension Housing Seal|Page 6171 > < Fluid - M/T|NV 1500|Page 6166
Page 1
background image

Seals and Gaskets: Service and Repair
Extension Housing Seal

Manual Transmission - NV 1500

Transmission Housing Oil Seal Replacement (Rear Seal) 

^

Tools Required 
-

J 23129 Universal Seal Remover

-

J 6125-1B Slide hammer

-

J 36503 Seal Installer

Removal Procedure 

1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft. 

3. Remove the rear oil seal from the rear case using the J 6125-1B (1) and the J23129 (2).
4. Remove the rear oil seal from the extension housing.

Installation Procedure 

1. Using the J 36503 install the new rear oil seal.
2. Install the rear propeller shaft. 
3. Check the transmission oil level. 
4. Lower the vehicle.

Manual Transmission - NV 3500

Transmission Housing Oil Seal Replacement (Rear Seal 2wd) 

^

Tools Required 
-

J 23129 Universal Seal Remover

-

J 6125-1B Slide hammer

Extension Housing Seal|Page 6171 > < Fluid - M/T|NV 1500|Page 6166