S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
3. Apply RTV gasket material to the inboard side of the bearing retainer.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front bearing retainer and the 6 bolts to the transmission.
Tighten the 6 bearing retainer bolts to 14 Nm (10 ft. lbs.).
5. Install the clutch actuator and the bolts.
Tighten the clutch actuator bolts to 8 Nm (71 inch lbs.).
6. Install the transmission.
7. Install the rear propeller.
8. Inspect the fluid level.
9. Lower the vehicle.