gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wiper Gear Box|Service and Repair|Page 11620 > < Blade Element Replacement - Rear|Page 11616
Page 1
background image

Wiper Gear Box: Service and Repair

WASHER PUMP/RESERVOIR REPLACEMENT

TOOLS REQUIRED

^

J 39232 Wiper Transmission Separator

^

J 39529 Wiper Transmission Installer

REMOVAL PROCEDURE

1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the transmission drive link from the wiper motor crank arm using the J 39232.

4. Remove the transmission screws.
5. Remove the transmission from the vehicle through the access openings in the top of the cowl.

INSTALLATION PROCEDURE

1. Install the transmission to the vehicle.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the transmission mounting screws.

Tighten
Tighten the wiper transmission mounting screws to 8 N.m (70 lb in).

IMPORTANT:  
^

Lubricate the inside of the socket with white lithium grease (GM P/N 9985885) or equivalent.

Wiper Gear Box|Service and Repair|Page 11620 > < Blade Element Replacement - Rear|Page 11616