S15/T15 Sonoma P/U 2WD V6-262 4.3L VIN W CPI (1994)
Blower Motor Resistor: Service and Repair
Without A/C
Blower Motor Resistor
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connectors, as necessary.
3. Blower motor resistor screws.
4. Blower motor resistor.
INSTALL OR CONNECT
1. Blower motor resistor.
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
2. Blower motor resistor screws.
-
Tighten screws to 1.9 Nm (17 lbs. in.).
3. Electrical connectors, as necessary.
4. Negative battery cable.
-
Check circuit operation.
