S15/T15 Sonoma P/U 2WD V6-262 4.3L VIN W CPI (1994)
When either a hose is reinstalled or replaced, the following points are essential:
-
Route return and feed hoses in the same position they were in before removal.
-
Route return and feed hoses smoothly, avoid sharp bends and chinking.
-
After return and feed hoses are installed, check for leaks while the system is being bled. Refer to "Bleeding The Power Steering System."
NOTICE: Do not start the engine with any power steering hose disconnected, or damage to the components could occur.
