S15/T15 Sonoma P/U 2WD V6-262 4.3L VIN W CPI (1994)
12.
Install starter field lead to solenoid.
13.
Install Campaign Identification Label
Campaign Identification Label and Claim Information
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. Additional "Campaign Identification Labels" can be obtained from DAC.
Apply "Campaign Identification Label" only on a clean, dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information as indicated.
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.
Owner Letter
January, 1994
Dear Chevrolet Owner:
This notice is sent to inform you that Chevrolet Motor Division is conducting a recall campaign that includes your vehicle.
REASON FOR THIS RECALL
General Motors has determined that certain 1994 Chevrolet vehicles, such as yours, may have a starter motor with an improperly heat treated pinion stop
collar. This condition may result in part failure causing slow engine crank speeds or an engine no start condition.
WHAT WE WILL DO
