S15/T15 Sonoma P/U 2WD V6-262 4.3L VIN W CPI (1994)
Removing Lock Bolt Guard
2. Lock bolt guard (2).
A. Place ignition switch to "RUN" position.
B. Rotate shaft (55) until block tooth is at 7 o'clock position and bolt guard screws are accessible through wide slots in shaft lock (6).
C. Loosen screws on lock bolt guard (2) until guard can be removed (screws will be retained with lock bolt guard (2).
D. Place ignition switch to "LOCK" position.
Removing Shaft Lock Retaining Ring
3. Shaft lock retaining ring (S) using J 23653-C to push down shaft lock (6).
^
Dispose of ring (5).
Removing Components From Upper Shaft
4. Shaft lock (6).
5. Turn signal cancelling cam assembly (7).
6. Upper bearing spring (8).
7. Upper bearing inner race seat (13).
8. Inner race (14).
