gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Door Lock and Power Actuator Assembly|Page 10816 > < Door Lock and Power Actuator Assembly|Page 10814
Page 1
background image

Front Door Panel: Service and Repair
Inside Door Handle

Front Door Inner Handle

Remove or Disconnect

Tool Required:

J 34940 Rivet Gun

1. Trim panel.
2. Water deflector.
3. Inside door handle rivets.

^

Drill out the rivet heads using a 5 mm (3/16 in.) drill bit.

4. Inside door handle.
5. Control rod (2) and clip from the handle.

Install or Connect

1. Control rods (2) and clip to the handle.
2. Inside door handle.
3. Handle Rivets housing using J 34940.
4. Water deflector.
5. Trim Panel.

Door Lock and Power Actuator Assembly|Page 10816 > < Door Lock and Power Actuator Assembly|Page 10814