S15/T15 Sonoma P/U 2WD V6-4.3L VIN W (1996)
Neutral Safety Switch: Service and Repair
The neutral start switch also incorporates the back-up light switch in these vehicles.
AUTOMATIC TRANSMISSION
1. Remove battery ground cable.
2. Remove lower insulator panel.
3. Remove neutral start switch electrical connector.
4. Remove neutral start switch.
5. Reverse procedure to install, noting the following:
a. Align actuator on the switch with holes in shift tube.
b. Press down on front of switch until tangs snap into rectangular holes in the steering column jacket.
c. Adjust switch by moving the gear selector to park.
MANUAL TRANSMISSION
1. Disconnect battery ground cable.
2. Disconnect back-up lamp switch electrical connector.
3. Remove switch from transmission.
4. Reverse procedure to install.
