S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Console: Service and Repair
Console Shift Replacement
REMOVAL PROCEDURE
1. Remove the shift handle retaining clip at the front of the handle.
2. Remove the shift handle from the shift lever.
3. Remove the screws that retain the shift boot to the vehicle.
INSTALLATION PROCEDURE
1. Install the fasteners that retain the shift boot to the vehicle
Tighten
Tighten the screws that retain the shift boot to the vehicle 1.9 N.m (17 lb in).
2. Install the shift handle to the shift lever.
3. Install the shift handle retaining clip at the front of the handle.