S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
1. Inspect the mounting bolts and sleeves for corrosion. Do not polish away any corrosion.
2. Replace corroded mounting bolts and sleeves.
INSTALLATION PROCEDURE
1. Lubricate the sleeves and bushings with Delco Silicone Lube or equivalent.
2. Install the bushings and sleeves in the caliper.
3. Install the caliper and the two mounting bolts.
^
Tighten the mounting bolts to 50 Nm (37 ft. lbs.).(2 wheel disc)
NOTICE: Refer to Fastener Notice in Service Precautions.
