S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
4. Install the caliper and the two mounting bolts.
^
Tighten the mounting bolts to 105 Nm (77 ft. lbs.). (4 wheel disc)
5. Compress the lining ears to the caliper.
NOTICE: Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.
6. Connect the brake hose to the caliper, if removed.
^
Tighten the brake hose fitting to 44 Nm (32 ft. lbs.).