S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
3. Inspect the brake hose fitting bolt. If the through-hole is blocked, remove the blockage or replace the bolt.
INSTALLATION PROCEDURE
1. Install the linings.
2. Install the caliper housing over the rotor and into the anchor bracket.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install new upper caliper mounting bolt.
^
Tighten the bolt to 31 Nm (23 ft. lbs.).
4. Install a new lower mounting bolt.
^
Tighten the bolt to 31 Nm (23 ft. lbs.).
