S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
5. Slide the cruise control cable conduit over the ribbon.
5.1. Install the tangs to the cruise control module housing.
5.2. Ensure that the tangs snap securely into place.
6. Route the cable over the brake booster, along the left side rocker cover under the preplenum air inlet tube, and above the radiator inlet hose.
7. Snap the cruise control cable engine-end fitting over the nail head stud on the throttle cam lever.
8. Connect the cruise control cable conduit fitting to the round hole in the engine cable bracket. Ensure that the tabs snap securely into the hole.
9. Connect the cruise control cable locator clip to the outboard rectangular hole in the routing bracket at the left front corner of the engine.
9.1. Route the cruise control cable above the accelerator cable.
9.2. Ensure that the clip snaps securely into place.