S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
4. Install the crankshaft balancer bolt.
4.1. Tighten the crankshaft balancer bolt to 95 Nm (70 ft. lbs.).
4.2. Tighten the pulley bolts to 58 Nm (43 ft. lbs.).
5. Install the front differential carrier shield, if equipped.
6. Install the steering linkage shield, if equipped.
7. Lower the vehicle.
8. Install the drive belt.
9. Install the fan shroud assembly.
10. Connect the battery negative cable.
