S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
3. Install the engine mount to engine bolts.
^
Tighten the engine mount to engine bolts to 54 Nm (40 ft. lbs.).
4. Install the engine mount frame bracket to the frame.
5. Install the engine mount frame bracket bolts.
^
Tighten the engine mount frame bracket bolts to 45 Nm (33 ft. lbs.).
6. Lower the engine.
7. Install the engine mount through-bolts and nuts. Tighten Tighten the through-bolts or the nuts to the following:
^
Tighten the through-bolts to 74 Nm (55 ft. lbs.).
^
Tighten the nuts to 63 Nm (46 ft. lbs.).
8. Install the starter, if removed.
9. Lower the vehicle.
