gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Fuel Gauge: > < Driver Information Center Module Replacement|Page 12213
Page 1
background image

Fuel Gauge: Customer Interest
Fuel Gauge - Incorrect Readings

File In Section: 08 - Body and Accessories

Bulletin No.: 99-08-49-004

Date: March, 1999

TECHNICAL

Subject:
Incorrect Fuel Gauge Readings
(Reprogram Vehicle Control Module with Revised Calibration)

Models:
1998*-99 Chevrolet and GMC S/T Pickup and 2 Door Utility Models with 4.3L Engine (VINs W, X - RPOs L35, LF6)
*RPO ZN4 Only

Built Prior to the Following VIN Breakpoints:

Condition
Some owners may comment on incorrect fuel gauge readings.

The fuel gauge may read empty (E) with approximately 1/3 of a tank of fuel remaining, or the fuel gauge rarely reaches the full (F) mark when the fuel
tank is filled.

Correction
Reprogram the vehicle control module (VCM) with the revised Fuel System Calibration. Use the appropriate calibration listed below. Refer to the latest
Tech line information for programming procedures.

Calibration Information

Calibration P/N (New)

Application

09374032
(Fuel System Calibration)

S/T 100 (Pickup) & LF6/L35

09374033

S/T 100 (2 Door Utility)

(Fuel System Calibration)

& L35

Important:

These calibrations are not available from GMSPO. These calibrations are available on 1999 Techline CD ROM Disc 5 and later.

Warranty Information

For vehicle repaired under warranty, use:

Labor 0peration

Description

Labor Time

Prom -

Use published

J6355

Reprogramming

labor

(On Car)

operation time

All Technical Service Bulletins for Fuel Gauge: > < Driver Information Center Module Replacement|Page 12213