S15/T15 Sonoma P/U 2WD V6-43L VIN X (1998) Alternator Component Diagrams
6. Remove the generator mounting bolts.
7. Remove the generator from the mounting bracket.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Cautions and Notices.
1. Install the generator mounting bolts.
Tighten
Tighten the front generator bolts to 50 N.m (37 lb ft).
2. Connect the generator output (BAT) terminal wire. Ensure the insulating boot is covering the terminal nut.
Tighten
