gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 6925 > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 6923

S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)

Page 5
background image

13. Position (snap) the plastic cap onto the fitting. Do not manually depress the retaining ring when installing the plastic cap onto the quick connect

fitting.

14. Ensure that the plastic cap is fully seated against the fitting.

15. Ensure that no gap is present between the cap and the fitting.

16. Ensure that the yellow identification band on the tube is hidden within the quick connect fitting. A hidden yellow identification band indicates

proper joint seating.

17. Do not install the cooler line end into the fitting incorrectly.

A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 6925 > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 6923