S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
5. Catch the oil in a suitable container.
6. Use the J 36511 in order to remove the oil drain plug.
INSTALLATION PROCEDURE
-
Tools Required
-
J 36511 Oil Fill/Drain Plug Hex Bit (117 mm)
1. Apply sealant to the oil drain plug threads. Use Teflon GM P/N 1052080, or the equivalent.
2. Use the J 36511 in order to install the oil drain plug.
-
Tighten the oil drain plug to 60 Nm (44 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.