S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
2. Remove the screw that retains the rear inside door handle bezel to the door trim panel.
3. Remove the inside door handle bezel from the door trim panel by sliding rearward.
Installation Procedure
1. Route the inside door handle and the lock rod through the appropriate openings in the bezel.
2. Align the lock rod to the door lock knob.
3. Position the bezel and snap the bezel into place.
4. Install the rear inside door handle bezel to the door trim panel.
5. Install the front inside door bezel to the door trim panel.
6. Insert the screw that retains the inside door handle bezel to the door trim panel.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
Water Deflector
Removal Procedure
Waterproof deflectors are used in order to seal the door inner panel and prevent water from entering the body. The deflector is secured by a strip of
adhesive between the water deflector and the door.
1. Remove the door trim panel.
2. Remove the door speaker, if equipped.
3. Remove the water deflector(s) from the door.
4. Remove the water deflector(s) from the rear side door.
5. Break the bond between the sealer and the door with a flat-bladed tool in order to remove the deflector(s).
Installation Procedure
