S15/T15 Sonoma P/U 4WD V6-262 4.3L VIN Z TBI (1995)
Four Wheel Drive Selector Switch: Service and Repair
Selector Switch
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Front floor console.
3. Switch harness at the indicator assembly.
4. Switch to bracket screws.
5. Switch from the bracket.
INSTALL OR CONNECT
1. Switch to the bracket.
-
Make sure the switch contact slide is aligned with the actuating pin on the lever.
2. Switch to bracket screws. Tighten switch to bracket screws to 4 Nm (35 lbs. in.).
3. Switch harness to the indicator assembly.
4. Front floor console.
5. Negative battery cable.