S15/T15 Sonoma P/U 4WD V6-4.3L VIN X (1998)
6. Install the valve spring (3).
7. Install the valve spring cap (2) on the valve stem.
8. Compress the valve spring (3) using the J 5892-D
NOTICE: When using J 38606 ensure that the jaws are completely engaged on the valve spring. If the jaws are not completely engaged the jaws
may slip off and scratch the valve spring. Replace the valve spring if the valve spring becomes scratch.
9. Use the J 38606 if the clearance does not permit use of J 5892-D.
NOTICE: Make sure that the valve stem keys are properly seated in the valve spring cap. Engine damage could occur if not properly installed.
10. Install the valve stem keys.
Use grease in order to hold the valve stem keys in place.
11. Carefully release the valve spring pressure, making sure the valve stem keys stay in place.
12. Remove the J 5892-D or the J 38606 and the J 22794.
