Safari Van 2WD V6-4.3L VIN X (2003)
Driver/Vehicle Information Display: Service and Repair
DRIVER INFORMATION CENTER MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the overhead console (3).
2. Remove the display lens and the switch plate (1).
3. Disconnect the electrical connectors.
4. Remove the temperature/compass electronic display module (2).
INSTALLATION PROCEDURE
1. Install the temperature/compass electronic display module (2).
2. Connect the electrical connectors.
3. Install the display lens and the switch plate (1).
4. Install the overhead console (3).
5. Recalibrate the compass.
