Safari Van 2WD V6-4.3L VIN X (2003)
2. Remove the nuts and bolts (1) that attach the assist step brace to the assist step support bracket.
3. Remove the assist step brace.
Installation Procedure
1. Install the assist step brace.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nuts and bolts (1) that attach the assist step brace to the assist step support bracket
Tighten the nuts and bolts (1) that attach the assist step brace to the assist step support bracket to 10 N.m (89 lb in).
3. Lower the vehicle.
Assist Step Support Bracket Replacement
Assist Step Support Bracket Replacement
Removal Procedure
1. Raise the vehicle to a suitable height.
Important: The assist step assembly does not have to be removed to replace the assist step support bracket.
