Safari Van 2WD V6-4.3L VIN X (2003)
7. Install the assist step support brackets and bolts (2) to the underbody.
Tighten the assist step support bracket and bolts (2) to the underbody to 25 N.m (18 lb ft).
8. Install the bolt from the inside of the pinchweld flange.
9. Install the assist step support brace bolt (1) to the pinchweld flange.
Tighten the assist step support brace bolt (1) to the pinchweld flange to 10 N.m (89 lb in).
10. Install the nuts that attach the assist step plate to the support bracket .
Tighten the nuts that attach the assist step plate to the support bracket to 10 N.m (89 lb in).
11. When installing the assist step, check the height and the alignment to rocker panel, cladding and to the body.
12. Install the rear section of the assist step extension.
Align the rear edge of assist step extension with the rear edge of the retainer and pushing downward until fully seated.
