Safari Van 2WD V6-4.3L VIN X (2003)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Rear Bumper
Removal Procedure
1. Remove the top fascia retainers.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Disengage the retainers from the underside of the fascia.
4. Remove the fascia from the impact bar.
Installation Procedure
1. Align the locator pin of the fascia to the hole in the impact bar.
2. Press the retainers into the underside of the fascia.
3. Lower the vehicle.
4. Install the top fascia retainers.